Do you want to know how to put in Roman Shades? Do you want to tackle the task or are still contemplating using a professional, knowing the steps for installation is a crucial aspect of the window treatment plan. Understanding the best way to install Roman Shades can help you determine if you’re confident in DIY-ing the installation as well as assist you in making a decision on which Roman Shades are the best choice for your home.

Steps for Installing Roman Shades

Once you’ve mastered a few of the things to take into consideration prior to installation, you’re now ready to understand the steps on how to put in Roman Shades.

Read the Install Instructions

Before you attempt installation, ensure that you read the entire installation guideline.

As the initial step in how to set up Roman Shades, be familiar with the basic design of these shades, so you’re prepared for the steps to follow.

Step 1: Learn Basic Roman Shade Construction

Roman Shades are generally constructed using a headrail and a single piece of fabric. The headrail is a piece of wood, often that has the material already attached which securely attaches your shade to the frame of your window ceiling or wall.

The method to set up Roman Shades with a headrail is to use screws for inside-mount applications or mounting brackets for an outside-mount installation, which means your steps are somewhat different.

Step 2: Gather Tools

The first step to follow for how to set up Roman Shades is to first get the tools you require to complete the task. They’re all commonly used items that you own. If you don’t own one or one of these tools They can all be found at the local hardware store. You might even be able to lease the drill even if you’re not yet ready to purchase it.

Tools Needed for Measure & Install

• Pencil
• Tape measures
• Level
• Stepladder
• Phillips screwdriver
• Drill

Step 3: Measure for Your Ordering Width & Length

The next step to follow for how to put in Roman Shades is to measure your window in order to determine the size and width. Making sure you have the correct measurements for length and width is crucial when you are ordering customized window treatments. 

If you’re thinking about prefabricated shades, you’ll have to choose the shade size that closely matches your measurements. That is why you could be using a shade that is not quite right or small. If you choose to make your own shade, however, it will guarantee the best fit as well as an elegant, customized look.

For proper measurement of your Roman shades, follow the guidelines below, based on the plan for mounting your shades outside or inside. Shades.

Measuring for Inside Mount

Begin by measuring the thickness of your window frame from the glass all the way to the edges of your window’s inner trim, in order to determine if it has an inside-mount possibility (the thickness should be at minimum 3/4″).

In order to determine length, you’ll use 3 measurements from top of the window to bottom. choose the most significant number for the length of your order.

For width, you should take three measurements and choose the smallest of numbers for the width of your order. By taking three measurements, this manner ensures that the shade is extended all down to the lower part of the window without getting caught on the frame’s sides.

Measure for Outside Mount

For width, you should measure according to how far the shade you’d like to extend past the frame of your window. Make sure you measure it to ensure that there’s a similar amount of shade that extends past the frame on both sides.

For length, take measurements based on the height above the frame the shades will reach. Begin at the point you wish the shades to rise over the frame. Then, determine the length all the way towards the base of the window frame.

Step 4: Mark Screw or Mounting Bracket Placement

The next step to follow for hanging Roman Shades is to mark the locations where your brackets or screws will be placed on your wall or window frame. The choice of using only screws, brackets, or screws to attach your headrail is contingent on the location you choose to place Roman Shades. The location of these will be determined by the mounting application.

Marking Screw Placement for Inside-Mount Roman Shades

If you purchase Roman Shades, the headrail will have holes for mounting that are pre-drilled in the headrail to make it easier for you. This gives you an easy method of determining the exact location the screws will be fixed to the window frame. 

Simply insert the screws into the mounting holes, and then make sure that the edges of the screw are visible from one side of the frame. After that, place the shade in a centered position within the frame of the window, with the front of the shade aligned with the edge of the frame. 

Then, press the headrail until the screw tips leave tiny indentation marks on the frame. This is where the screws will go to attach this headrail to the frame.

Marking Bracket Placement for Outside-Mount Roman Shades

The placement of the brackets for an outside-mount application will be determined by the measurements you have calculated for the shade’s width. Be sure that the brackets are equally spaced across the length of the shade and at a level. 

Also, make sure they’re placed in a manner that does not hinder your shade’s controls. Note the bracket’s placements using the pencil.

Be aware of the location of your brackets, because If they don’t fall on an underlying stud, you’ll need to buy an anchor for drywall to fix your shade.

Step 5: Install the Headrail

Once you’ve identified the correct positions for the brackets or screws, the next step to follow for how to put in Roman Shades is to install and install your headrail.

Inside-Mount Headrail Installation

For inside mounting your headrail, The easiest method is to use a drill to make pilot holes before drilling the screw indentations that you made in Step 3. Make use of 1/8″ drill bit to do this.

Reposition the headrail within your windows, ensuring that the screws line up with your pilot holes. Make use of a drill or screwdriver to secure the headrail and screws.

Outside-Mount Headrail Installation

For an installation with an outside mount First, align your brackets using the pencil marks you made during Step 3 and secure them using the screws provided. Be sure that your brackets are in line with each other.

Then, you place your headrail onto the brackets and mark the headrail in the place where the brackets are. Make pilot holes in the headrail with the 1.8″ drill bits for each bracket position.

Then, connect the headrail to the brackets using the screwdriver or drill and the screws that are appropriate.

The Fabric panel for your Roman Shades is fully attached to your headrail. Once you have installed the headrail, you’ll be able to use your shades.

Count on Us to Assist You with Your Task

Now that you know the steps to install Roman Shades, you can decide if you wish to do the work yourself or seek out professional assistance to complete your project. 

If you opt for Roman Shades, you have the option of relying on our experts, who will manage your project from measuring through installation so that you won’t need to do anything but lift your finger. 

You’ll also have confidence that the shades will be installed to be perfect and functional. Book a complimentary professional measurement now to get your project started with a bang and let the burden off your to-do list.